News Center
What are the main uses of Conveyor Chain Guide?Conveyor Chain Guide: The conveyor chain guide supports the chain and provides guidance during the chain operation to ensure the stable operation of the chain.Reduce friction and noise: Because the Conveyor Chain Guide is made of wear-resistant…
2024/05/27 14:36
The installation of Synthetic Rink Panels is a process that requires precision and professionalism to ensure smoothness, durability and athlete safety on the ice surface. The following are the general steps for Synthetic Rink Panels installation:1. Site preparation: Clean and level the site to…
2024/05/23 14:47
A Dasher Board is a protective device that is installed around a hockey rink and is usually made of materials such as high-density polyethylene (HDPE). Its main role is to protect the safety of athletes and spectators, reduce the impact of collisions, and reduce the risk of injury.Dasher Board has…
2024/05/20 14:39
The main function of Ground Protection Mats is to provide a layer of protection against scratching, abrasion, stains or other forms of damage to the ground. Its usefulness depends on a number of factors, including, but not limited to, the following:Material and thickness: High quality Ground…
2024/05/17 10:09
What Are They Used For? HDPE is a food safe material, so it's commonly used in packaging for food and bottles for beverages. In its sheet form, it is commonly used to create cutting boards or food prep surfaces. HDPE Plastic Sheet has a wide range of uses, and the following are its main application…
2024/05/13 14:11
Ultra-high molecular weight polyethylene (UHMWPE) is an excellent engineering plastic, which occupies an important position in the manufacture of UHMWPE Conveyor Parts because of its unique properties. Here are some typical applications of the material in UHMWPE Conveyor Parts:Rollers: As an…
2024/05/10 14:38
Polyurethane Board, as a high-quality building material, is widely used in the field of thermal insulation. Its unique structural design, which consists of two layers of solid metal sheets filled with polyurethane foam between them, not only gives Polyurethane Board excellent thermal insulation…
2024/05/06 14:12
Nylon Sheet is a high-performance engineering plastic that is widely used in a variety of manufacturing applications. Here are some typical uses of Nylon Sheet:Mechanical parts: Nylon Sheet can be used to manufacture mechanical parts, such as gears, bearings, cams, sliders and so on.Wear-resistant…
2024/04/29 14:12
How To Measure Conveyor Chain GuideMeasuring the Conveyor Chain Guide requires some basic tools and steps:Measuring tools: Measuring tools such as tape measure, vernier caliper or laser rangefinder are usually used.Measurement position: Determine the start and end of the Conveyor Chain Guide to be…
2024/04/25 15:30
How To Tell If Plastic Is Nylon?Here are some ways to tell if a plastic is Nylon Sheets:Look: Nylon plastics usually have a glossy, smooth surface.Touch: It may be tough and flexible to the touch.Combustion test: ignite a small portion of the material, nylon will have a specific smell when burning…
2024/04/22 13:54
The quality of Crane Outrigger Pads is very important for the stability and safe use of cranes. The following are some requirements for crane leg pads:Strength: The leg pad should have sufficient strength to withstand the weight and working load of the crane. The strength of the leg pad should be…
2024/04/18 14:10
UHMW Machined Parts of the market outlook,UHMW Machined Parts have good market prospects in the fields of equipment lining, wear-resistant conveying and various mechanical parts due to their strong self-lubrication, impact and wear resistance and chemical resistance.According to LP Information, the…
2024/04/15 15:57
